Quality has always been our priority. Our products are certified as per IS: 9537 (Part III) Standards. In order to assure best quality, all the tests are conducted in house as per the Bureau Of Indian Standards (BIS), on a regular basis. The following tests are conducted by our qualified engineers, in a well equipped and certified Laboratory:

Marking Test:

Marking parameters like manufacturer’s name, nominal sizes, country of manufacture, strength & standard mark are tested under this. Also a test for durability of marking is conducted

Dimension Test:

The attributes tested in this are Maximum and Minimum Outside and Inside Diameter, Length of conduit and uniformity of wall thickness.

Construction Test:

The requirements specified under this test are that the inside and outside surface of conduit are reasonably smooth and free from burrs, flash and similar defects; and the edges over which the conductors or cables are likely to drawn does not damage the cable or conductor.

Mechanical Property:

The tests conducted for mechanical properties are the bending test, compression test (during and after the load), Impact test and Collapse test.